Divers

Professional services for marinas,
residential locations, & transient cruisers.
Call Us Today (727) 252-9915
Slide
Slide
Slide 3

Welcome to
Gulf & Bay Divers!

Gulf&Bay Divers serve to be your eyes under the water for your vessel whether you are located at a marina, residence, or are just passing through as a transient.
We pride ourselves on having professional office staff & the best trained divers to provide you with exceptional customer service. We are headquartered in Madeira Beach, Florida and serve Pinellas, Hillsborough, and Manatee county marinas & residences. For more information or a complimentary quote to service your vessel
Hull Maintenance & Cleaning
Zinc Monitoring & Replacement
Propellor Pulls, Repairs & Installations
Other Specialty Labor
Slide

Don't Forget That Some Of The Best Advice To Maintain Your Boat
Is To Run Your Boat..... Have Fun Boating!

Slide

Why Trust Our Dock Works Services?

Recuring Hull Cleaning
Gulf & Bay Divers offers a 2 or 4 week hull cleaning cycle for our customers.

Many boats that reside in the high growth areas are on a 2 week cycle during the warm water months and then switch to a 4 week cycle once the water temperatures drop below 70 degrees.

We also offer on call services for our transient cruisers and work with many yacht management companies as their on call divers.
Zinc Monitoring & Replacement
Labor cost for zinc installation is currently $7.50/zinc for standard shaft and trim tab zincs and $12/zinc for hull and specialty zincs.

The labor cost does not include the cost of the zincs themselves.

We charge MSRP for sacrificial anodes (aka zincs) and if you would like to provide your own just call the office to let us know and they will be kept in a dock box or easily accessible cockpit locker.
Specialty Labor
We also are available to help with any specialty labor you may need such as:
• Prop Pull
• Prop Installation
• Recommendations for bottom paint
• Recommendations for haul out yards
• Annual service of geared propellers
• Underwater survey
• Electrolysis identification and diagnosis
• Recommendations for marine electricians
• Recommendations for marine mechanics
Slide

Our Services

Hull Cleaning
Gulf & Bay Divers offers a 2 or 4-week hull cleaning cycle for our customers.
• Many boats that reside in the high growth areas are on a 2 week cycle during the warm water months and then switch to a 4 week cycle once the water temperatures drop below 70 degrees.
• We monitor your growth and make recommendations if you are in one of these high growth areas
On Call Services:
• We also offer on call services for our transient cruisers and work with many yacht management companies and boat brokers as their on call divers.
Off Schedule Cleanings:
• If the boat will be traveling, out of the water, or potentially sold please try to give a week notice if possible.
• SeaTrial cleanings & Haul Out cleanings: We recommend that if your boat is being hauled out for maintenance that you schedule a cleaning within 48 hours before haul out.
• If you need a special, off schedule, cleaning we are happy to adjust as needed, call or email our office.
Zinc Monitoring and Replacement
• Gulf & Bay Divers carries an extensive inventory of anodes for your vessel.
• Labor cost for zinc installation is currently $7.50/zinc for standard shaft and trim tab zincs and $12/zinc for hull and specialty zincs.The labor cost does not include the cost of the zincs themselves.
• We charge MSRP for sacrificial anodes (aka zincs) and if you would like to provide your own just call the office to let us know if they will be kept in a dock box or easily accessible cockpit locker.
• If you have questions about electrolysis issues please let us know and we'll provide regular zinc ratings in your boat reports to see the anode burning rate trends.
• Fast burning zincs can indicate heavy electrolysis issues. Zincs that burn too slowly can also be bad, if not bonded correctly the sacrificial zinc anodes may not be doing their job.
Zinc Monitoring and Replacement
• Gulf & Bay Divers carries an extensive inventory of anodes for your vessel.
• Labor cost for zinc installation is currently $7.50/zinc for standard shaft and trim tab zincs and $12/zinc for hull and specialty zincs.The labor cost does not include the cost of the zincs themselves.
• We charge MSRP for sacrificial anodes (aka zincs) and if you would like to provide your own just call the office to let us know if they will be kept in a dock box or easily accessible cockpit locker.
• If you have questions about electrolysis issues please let us know and we'll provide regular zinc ratings in your boat reports to see the anode burning rate trends.
• Fast burning zincs can indicate heavy electrolysis issues. Zincs that burn too slowly can also be bad, if not bonded correctly the sacrificial zinc anodes may not be doing their job.
Specialty Labor
We also are available to help with any specialty labor you may need such as:
• Search & Recovery
• Prop Pull
• Prop Installation
• Recommendations for bottom paint
• Recommendations for haul out yards
• Annual service of geared propellers
• Underwater survey
• Electrolysis identification and diagnosis
• Recommendations for marine electricians
• Recommendations for marine mechanics
• Dock Repair
• Dock Piling Wrap to protect against boring worms
• Concrete Jacketing of Pilings
As a licensed & insured marine contractor, we are the only company in the area who has worked with local engineers and municipalities to gain permits for concrete jacket work.
Many of our customers are coming from northern or fresh waters and heavy growth, zinc anodes, and a new type of boat can bring about maintenance issues that are unfamiliar. Questions on boats and Florida waters are more than welcome. If we don't know an answer, we can introduce you to those that do.
Slide

What Our Clients Say

Slide

Frequently Asked Questions

Gulf & Bay Marine offers a range of professional services, including hull maintenance and cleaning, zinc monitoring and replacement, propeller pulls, repairs, and installations. We also provide specialty labor like search and recovery, recommendations for bottom paint, and dock repairs.

We recommend a 2-week hull cleaning cycle during warm months for boats in high growth areas and a 4-week cycle when water temperatures drop below 70 degrees. We also offer on-call cleaning services and off-schedule cleanings, depending on your needs.

Yes, we offer regular zinc ratings in your boat reports to monitor anode burning rate trends, which can indicate electrolysis issues. If you have specific concerns, we can provide advice and discuss potential solutions.

For a free quote please click on the “Get A Free Quote” button at the top of the website. You can contact us by calling 727-252-9915, emailing info@gulfandmarine.com, or using the contact form on our website.

Slide

Ready to Get Started?

Contact us today for divers